Britax Willow Guia Del Usuario página 17

3. Move the base up or down until the
entire blue marker is completely visible
between the two lines on the recline
angle indicators.
IMPORTANT: After the child is secured in
the child restraint and the child restraint
is attached to the base, ensure that the
entire blue marker is completely visible
between the two lines on the recline angle
indicator.
If there is a problem achieving the proper
recline angle after installing, try another
approved seating position in your vehicle or:
a. Uninstall the base and lower the
recline angle adjustment foot to the
lowest position.
b. Remove the base from the vehicle and
place a rolled towel or pool noodle in
the vehicle seat bight.
c. Place the base against the towel or
pool noodle and install.
NOTE: If a towel or pool noodle is needed
for the recline angle, the recline angle
adjustment foot on the base should remain
in its lowest position.
3
15