Gloria FINECUT 18V Instrucciones De Uso página 28

RZ_FineCut18V.qxp_Text_GB 06.02.23 19:42 Seite 28
4 Technical data
Set – Item number(s):
Set incl. battery with charger – Item number(s): 001300.0000
Battery
Type:
Nominal voltage:
Rating:
Charging station (AL 1810 CV)
Input voltage:
Output voltage:
Battery charging time:
Battery life 2.5AH / 4.0AH:
Per. charging temp. range:
Protection class:
Cutting width:
Height adjustment:
Max. stroke rate:
Weight of device:
5 Unpacking
Figures 1a - 1b
1b
1a
- Your
assembled. The loose parts that
are included must be installed
accordingly, depending on the
application.
6 Assembling the grass trimmer
Figures 2 - 7
WARNING
RISK OF CUTTING INJURY
FROM SHARP / POINTED
METAL BLADE BARS!
Some parts of the grass trimmer have
sharp edges and could cause injury.

Wear protective gloves during
assembly and cleaning work!

Do not reach into the knife blades!

Only assemble with the blade guard
attached (K)!

Slide the blade guard (K) onto the
blade bar (J)!
001301.0000
Lithium-ion
18.0 V
2.5 Ah
220-240 V~ / 50/60 Hz
14.4-18.0 V / DC / 1.0 A
154 Min.
60 Min. / 95 Min.
0 – + 45 °C
II
250 mm
30 / 40 / 50 mm
1.100 strokes per min.
approx. 2.7 kg
6.1 Assembling the connecting
tube
Figures 2 - 5
is supplied pre-
3
4
5
6.2

28
2
After removing the packaging, connect
the connecting tube (G) to the device.
When joining, make sure that the fixing
lug is seated in the groove as shown,
and that the contacts (H1) are inserted.
This ensures that the connection is
mechanically and electrically intact.
Manually tighten the lower screw con-
nection.
Now connect the connecting tube (G)
to the handle. When joining, make
sure that the fixing lug is seated in the
groove as shown, and that the con-
tacts (F1) are inserted. This ensures
that the connection is mechanically
and electrically intact.
Now manually tighten the upper
screw connection.
Height adjustment
Your is delivered with the
wheels fully assembled. The factory-set
cutting height is 3 cm. However, pro-
ceed as follows if you wish to adjust the
cutting height to 4 cm or 5 cm: