TEFAL Rowenta INTENSE PURE AIR HOME PU618 Serie Manual De Instrucciones página 10

« HOW TO ACHIEVE CLEANER INDOOR AIR »
In addition to using your Intense Pure Air Home purifier, here are some tips on how to
improve the quality of your indoor air:
• Ventilate the rooms for at least 10 min. every day, in summer and winter
• Maintain your ventilation system
• Limit the use of household products
• Do not smoke indoors
• Avoid home fragrances, incense sticks, scented candles, etc.
• Ventilate whenever any work is being conducted in your home and for several
weeks afterwards
• Avoid green plants that are allergenic or need frequent watering
WHERE TO INSTALL THE APPLIANCE
Place the purifier on a flat, stable surface in the room requiring treatment.
To allow the air to circulate freely, avoid placing the appliance behind curtains, below a window,
item of furniture or shelf unit, or close to any other obstacle, and leave at least 50 cm of free space
on each side of the appliance.
BEFORE USING THE APPLIANCE FOR THE FIRST TIME
Make sure that the plastic packaging protecting the filters has been removed before using the appliance.
Also make sure that:
• The voltage of your electrical installation corresponds to the one indicated on the appliance.
• Your appliance can be used with a power plug without an earth connection. It is a class II ap-
pliance (double electrical insulation),
• The appliance is positioned in the house as described above,
• The air inlet and outlet grids are completely unobstructed,
• Ensure the 3 filters and front panel have been correctly installed (see section titled filter assem-
bly/dismantling paragraph).
This appliance is fitted with a device that automatically prevents it from operating if the front door
is not correctly assembled.
• The 4 feet are correctly assembled
Insertingandreplacingthefilters
This appliance is equipped with 3 types of filters:
Pre-filter Active carbon
filter
NB: For optimum performance of the appliance, only use filters provided by Rowenta/Tefal.
To replace the filters, follow the instructions in the section « Disassembling/Reassembling filters ».
Please note: certain filters may emit a temporary slight odour, due to the transport and storage conditions.
16
Allergy+ filter
SWITCHING THE APPLIANCE ON
Settingthepollutionsensors
The appliance is preset to medium sensitivity.
If the air quality indicator remains:
– poor after 2 hours in operation although the air seems to be purified
– excellent for more than 1 hour although the air seems to be polluted
you can adjust the sensor sensitivity as follows:
1. When the air purifier is off, hold down the mode setting button for 3 seconds:
2. Set the sensitivity by briefly pressing the mode setting button:
+ Blue
Low sensitivity Medium sensitivity
• Select high sensitivity if the air purifier indicates excellent air quality for more than 1 hour although the air
seems to be polluted.
• Select low sensitivity if the air purifier continues to indicate poor air quality even though it has been
operating for more than 2 hours and the air seems sufficiently purified.
3. Press 'Start/Stop' button to validate the sensitivity setting.
OPERATION
Start
Briefly press this button to switch the air purifier on or off.
• Modebutton(2)
– AUTODAY and AUTONIGHT mode: if the air quality level is excellent then the device does not run.
– Press this button to select one of the four modes. The corresponding indicator will turn on to
indicate the selected mode.
– Daytime auto mode: the fan speed is set to 1,2,3 or 4.
– Nighttime auto mode: The fan speed is set to 1 or 2.
– Quiet mode: The fan speed is set to minimum. Use this mode in quiet environments.
– Turbo mode: The fan speed is set to maximum. Use this mode when air quality is poor.
Light
You can change the light intensity of the appliance as you wish or according to the time of day.
Press Air quality indicator
1 Light up
2 Moderate light
3 Off
Timer/delayedstart
– Timer: When the appliance is on, you can use this button to define the operating duration.
Briefly press the button to select the number of operating hours desired (1, 2, 4 or 8) and the
appliance will automatically turn off at the end of the selected period.
– Delayed start: When the appliance is off, briefly press the button to set the appliance to turn on
in a certain number of hours (1, 2, 4 or 8).
+ Orange + Red
High sensitivity
Control panel
Light up
Moderate light
Moderate light
EN
FR
17