Descargar Imprimir esta página

Schwaiger NWSW0050 Manual De Instrucciones E Indicaciones De Seguridad página 11

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 42
USER GUIDE
4. INTENDED USE
The network switch serves to interconnect by cable
(shielded
connection cables) computers or other devices suitable for this
purpose.
The network switch is designed for network environments in
which the network traffic and the number of users is constantly
increasing. The network switch is ideal for workgroups with
bandwidths of 10, 100 and 1000 Mbit/s with multiple high-speed
servers. The highest bandwidth is 200 Mbit/s (100 Mbit/s full
duplex) and each port provides an instantaneous data line to a
workstation for simultaneous access to the server.
The network switch is the perfect choice for 10-Mbps network
locations that may be upgraded to fast ethernet in future Ethernet
workgroups can connect with the switch and subsequently change
adapters and hubs without replacing the switch or reconfiguring
the network.
Any other type of use is considered to be unsuitable and may
result in personal or property damage (in addition it may carry
risks such as short circuit, fire, electric shock, etc.). Schwaiger
GmbH accepts no liability for damage resulting from improper use,
improper installation or incorrect use. In such cases, the warranty
and guarantee will be invalidated.
The network switch is easy to install and use. There is no required
configuration or installation.
11

Publicidad

loading