Publicidad
Idiomas disponibles
Idiomas disponibles
4.
Tighten the clamps and tie both ends of the rope into knots.
5.
Hook up the cord on the fasteners.
3.3. Cleaning and maintenance
a)
Use non-corrosive agents for cleaning the surfaces only.
b)
After each cleaning, dry all components well before the product is used again.
c)
Store the product in a dry and cool place, protected from moisture and direct
sunlight.
d)
Regularly inspect the product for technical defects and damage.
e)
Use a soft, damp cloth for cleaning.
f)
Do not clean with any sharp and/or metal implements (e.g. a wire brush or a
metal scraper) as these may damage the surface of the product.
g)
Do not clean the product with acidic substances, medical products, thinners,
fuel, oil or other chemicals as they may damage it.
Publicidad
