Publicidad
Idiomas disponibles
Idiomas disponibles
3.
Introduction
MANUFACTURER:
Scheppach GmbH
Günzburger Straße 69
D-89335 Ichenhausen
DEAR CUSTOMER,
We hope your new tool brings you much enjoyment and suc-
cess.
NOTE:
In accordance with the applicable product liability laws, the
manufacturer of this device assumes no liability for damage
to the device or caused by the device arising from:
• Improper handling,
• Failure to comply with the operating instructions.
• Repairs carried out by third parties, unauthorised special-
ists.
• Installing and replacing non-original spare parts,
• Application other than specified.
Please consider:
Read through the complete text in the operating manual be-
fore installing and commissioning the device.
The operating manual is intended to help the user to become
familiar with the machine and take advantage of its applica-
tion possibilities in accordance with the recommendations.
The operating manual includes important instructions for safe,
proper and economic operation of the device, for avoiding dan-
ger, for minimising repair costs and downtimes, and for increas-
ing the reliability and extending the service life of the device.
In addition to the safety instructions in this operating manual,
you must also observe the regulations applicable to the op-
eration of the device in your country.
Keep the operating manual package with the machine at all
times and store it in a plastic cover to protect it from dirt and
moisture. They must be read and carefully observed by all
operating personnel before starting the work.
The device may only be used by personnel who have been
trained to use it and who have been instructed with respect
to the associated hazards. The required minimum age must
be observed.
In addition to the safety instructions in this operating manual
and the separate regulations of your country, the generally
recognised technical rules relating to the operation of such
machines must also be observed.
We accept no liability for accidents or damage that occur due
to a failure to observe this manual and the safety instructions.
4
GB/IE/NI/CY/MT
4.
Device description
1.
Saw chain
2.
Guide rail
3.
Front hand guard
4.
Fuel pump primer
5.
Throttle
6.
Rear handle
7.
Throttle interlock
8.
Start pull cord
9.
Air filter cover
10. Lock for the air filter cover
11. Chain oil tank cap
12. Front handle
13. Fuel tank cap
14. Cold start lever (choke)
15. On/off switch
16. Fixing nuts
17. Chain cover
18. Silencer
19. Suspension device
20. Spark plug wrench / slotted screwdriver
21. Guide bar cover
22. Mixing container
23. Chain tensioning screw
24. Claw stop
25. Chain catcher
26. Chain tensioning pin
27. Chain wheel
28. Guide groove
29. Fastening pins
30. Sprocket
31. Lubrication port
32. Oil adjustment screw
33. Air filter
34. Spark plug
35. Spark plug connector
36. Suction head
5.
Scope of delivery
• Tree pruning saw
• Saw chain
• Guide rail
• Guide bar cover
• Spark plug wrench / slotted screwdriver
• Mixing container
Publicidad
