Tommee Tippee LETSGO Instrucciones De Uso página 3

PARTS DESCRIPTION
1
2 3
37
C
CLEANING
1. Unplug the USB cable.
2. Ensure product is switched off and cool.
3. Remove the silicone ring and the adapter.
4. Wipe clean with a damp cloth, or use a Tommee Tippee
teat and bottle brush for hard to reach areas.
5. Clean all surfaces that comes into contact with bottle with
antibacterial wipes before use.
6. Do not clean with abrasive cleaners.
7. Do not immerse in water.
DE-SCALING
We recommend you descale the product daily. Turn off the unit
and allow to cool before descaling, wipe with a damp cloth only.
We recommend that you descale your appliance according to the
guidelines below to ensure that it continues to work efficiently.
Use a descaler that is suitable for use with stainless steel ie. coffee or
iron descaler, and use as per the manufacturer's guidelines. Or you can
use white vinegar or a descaling sachet to descale your unit. Please use
as per manufacturer's guidelines. Where no method is stated use 15ml
of white vinegar and 15ml water. After descaling wipe clean or use mild
liquid soap to clean the heat plate.
HOW TO USE
Choose the correct adapter for the bottle you are using and make sure
the silicone ring is in place.
1
2
5 6
'BEEP'
1. Take a prepared baby bottle that requires warming, either breast
milk from storage or formula milk made up as per
manufacturer guidelines.
2. Put the warmer upside down and screw on the baby bottle securely.
1. Lid
2. Integrated stainless steel neck
3. Silicone sealing ring
4. On / Off and temperature selection
5. USB cable charging port
4
5
BASE OF UNIT
3 4
7 8
3. Long press for 2 seconds to power on. The power button is
on the base.
4. Select a temperature by single click through the options.
5. The warmer starts heating automatically, it will beep when the
desired temp has been achieved.
6. The warmer will now keep the milk at the chosen temperature.
7. Turn the unit so the bottle base is flat on the surface, unscrew the
warmer from the bottle. Always check the milk's temperature
before feeding.
8. Long press for 2 seconds to power off.
BATTERY POWER INSTRUCTION
1. Battery Power Display:
Press On/Off button to know current battery power under the
state of "power off". When it displays "100" it means
100% power available.
2. Low Power Display under working state:
"Lo" displayed to warn that the battery is less than 20%
available, please charge. When "Lo" is displayed, it blinks
for 6 seconds and then powers off.
Note: Please charge the warmer with 2A power adapter.
The battery takes 4 hours to charge fully and you can get 7 uses out
of each charge (based on 150ml bottle warming from room temp to
body temperature).
COMPATABILITY
Compatible with Tommee Tippee
and Philips® Avent®. For MAM® and
Tommee Tippee use the adapters provided,
®
for Philips® Avent® screw the bottle directly
to the warmer.
Do not use on glass bottles.
HEATING TIME
Note: External power supply (2A adapter) is recommended to use when
using the warmer at home.
Heating from
chilled to body
temperature
90ml 7 mins
150ml 10 mins
260ml 25 mins
HEAT PRESERVATION TIME
Warmer can keep milk warm for 4 hours on one charge based on a
260ml bottle.
TECHNICAL PARAMETERS
Model
Product Size
Input Voltage
Output Voltage
Max Power
N.W.
Battery
, MAM®
®
MAM®
Tommee Tippee®
Heating from room
temperature to
body temperature
4 mins
7 mins
12 mins
T5 - 21B
85x85x102mm
5V / 2A
6~8.4V
35W
399g
7.4V / 4400mAH