Flex TL 4000 18.0/230 Instrucciones De Funcionamiento página 14

Symbols used in this manual
WARNING!
Denotes impending danger. Non- observance
of this warning may result in death or
extremely severe injuries.
CAUTION!
Denotes a possibly dangerous situation. Non-
observance of this warning may result in
slight injury or damage to property.
NOTE
Denotes application tips and important
information.
Symbols on the power tool
Do not stare at operating lamp
Class III
To reduce the risk of injury, read the
operating instructions!
Disposal information for the old
machine (see page 19)!
For your safety
WARNING!
Before using the power tool, please read the
follow:
these operating instructions,
the "General safety instructions" on the
handling of power tools in the enclosed
booklet (leaflet-no.: 315.915),
the currently valid site rules and the
regulations for the prevention of
accidents.
This power tool is state of the art and has
been constructed in accordance with the
acknowledged safety regulations.
Nevertheless, when in use, the power tool may
be a danger to life and limb of the user or a third
party, or the power tool or other property may be
damaged.
The cordless tripod light may be used only
14
as intended,
in perfect working order.
Faults which impair safety must be repaired
immediately.
Intended use
The tripod light is intended
– for commercial use in industry and trade,
– for workspace lighting.
Safety instructions for tripod
light
WARNING!
Read all safety warnings, instructions,
illustrations and specifications provided
with this power tool. Failure to follow all
instructions listed below may result in electric
shock, fire and/or serious injury. Save all
warnings and instructions for future reference.
■ The light source of this luminaire is not
replaceable; when the light source reaches
its end of life the whole luminaire shall be
replaced.
■ Prevent unintentional starting. Ensure
the switch is in the off-position before
connecting to battery pack, picking up
or carrying the appliance. Carrying the
appliance with your finger on the switch or
energizing appliance that have the switch
on invites accidents.
■ Disconnect the appliance from power
source before making any adjustments,
changing accessories, or storing
appliance. Such preventive safety
measures reduce the risk of starting the
appliance accidentally.
■ Do not direct the light beam at persons
or pets and avoid staring into the light
even from a distance.
■ To reduce the risk of injury, do not stare
at operating lamp. Serious eye injury
could occur.
■ To reduce the risk of burns, do not touch
hot lens.
■ Do not operate this light in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust. Light
create heat which may ignite the dust or
fumes.
■ Have servicing performed by a qualified
TL 4000 18.0/230