Connection Diagram
(1) Connect NVR to router using a network cable.
(2) Connect monitor to the NVR via the HDMI port.
(3) Connect USB mouse to the USB port on the side panel of NVR.
(4) Connect NVR to 12V power supply.
(5) After the system starts, connect IP camera to power supply, and the camera will be
automatically paired and connected to the NVR (support 8 cameras max).
(6) The monitor will show the real-time monitoring picture of the camera.
Ethernet Port-Router
NOTE: To ensure the device works properly, it is recommended to power on the
NVR first for testing before a final installation.
NVR
Power Input
2
USB Port-Mouse