Descargar Imprimir esta página

Daewoo DCS2016E Manual De Usuario página 9

Publicidad

Idiomas disponibles

Idiomas disponibles

• Make sure that you can stand firmly and safely in each work position. When work- ing on a sloping
subsurface, be espe- cially careful!
• Always hold the device firmly in both hands. Use your right hand to grip the rear handle, your left
hand to grip the other handle, even if you are left-handed. Do not let go of the handles!
• When the saw is running, keep all body parts away from the saw chain. Make sure before starting
the saw that the saw chain does not touch anything.
• Never saw above shoulder height! Do not lean forward or back!
• Always ensure that you are standing firmly and only use the chain saw when you are standing on
stable, firm and level ground. A slippery subsurface or instable standing area such as on a ladder
can cause you to lose your balance or lose control over the chain saw.
• Do not stretch your arms too far forwards.
• Never work on ladders, on trees or in other positions in which you cannot stand safely.
• Take care when walking backwards. Dan- ger of stumbling!
• Always saw at a high chain speed.
• Do not saw any wood which is under ten- sion.
• Do not work alone! Ensure that you have an aural, visual or other connection with another person
who is in a position to administer first aid in emergency situa- tions.
• With each change of location, switch the motor off and activate the chain brake. The device may
only be carried with the saw rail facing towards the back and a protective cover on.
• Never operate the device in moist or wet environments.
• Always keep the cable out of the working area of the device. Always guide the cable behind the
device.
• If necessary, only use extension cables suitable for the device and its environ- ment.
• Symbols appearing on your product may not be removed or covered. Information on the product
that are no longer legible must be replaced immediately.
Observe the safety instructions before using the product for the first time.
Read and observe the operating instruc- tions before commissioning.
Protect the device from wet conditions. Store in a dry location.
Remove the plug from the mains imme- diately if the cable is damaged or cut.
Personal protective equipment/sensi- ble clothing
When cutting, wear the following protective equipment:
Head protection: safety helmet with visor / Ear protection: earplugs/ear muffs according to DIN
EN 352-1 / Eye protection: wrap-around gog- gles/protective visor on the helmet
Foot protection: safety shoes with gripping soles, steel caps and leg protection
Hand protection: work gloves of leather
Clothing: safety overalls (cut-proof) Safety jacket (cut-proof)
Avoid with your clothing that you get caught on something:
• Wear only close-fitting clothing!
• Do not wear any jewellery!
• If you have long hair, wear a hair net!
Residual risks
Even when using correctly, there is still a ele- ment of residual risk that cannot be excluded.
• Contact with the unprotected saw chain (injury by cutting)
• Expulsion of parts of the saw chain
8

Publicidad

loading