StetSom DB500.1 Manual De Usuario página 17

Indicators LED
POWER (Blue LED): Indicates the amplifier is operating when lit.
Smart protection system
When the protection system is active, the amplifier will turn off and the PROT LED (RED)
will light up. Turn off the amplifier to correct the indicated fault and turn it on again.
Diagnostic: Short circuit or output overload.
Solution: Check that the speaker cables are well insulated and that the output impedan-
blink
1x
ce doesn't exceed that supported by the amplifier.
PROT (Red LED): Indicates that the amplifier
detected faults and entered protection mode.
Check the possible failure and turn the amplifier
back on.
17