Publicidad
Idiomas disponibles
Idiomas disponibles
3.4.
Cleaning and maintenance
a)
Before cleaning, adjustment or replacement of accessories, and when the
device is not in use, pull the power supply plug and let the device cool down
completely.
b)
Use only non-corrosive agents for cleaning the surface.
c)
After each cleaning, all components should be well dried before the device s
used again.
d)
Store the device in a dry and cool place protected from moisture and direct
sunlight.
e)
Do not spray the device with a stream of water and do not immerse it in
water.
f)
Ensure that no water enters through the ventilation openings in the housing.
g)
Clean the ventilation openings with a brush and compressed air.
h)
Regularly inspect the device for technical failure and damage.
i)
Use a soft cloth for cleaning.
j)
When selecting cleaning agents, take into consideration type of substance
previously used in the device.
DISPOSAL OF USED DEVICES.
At the end of its service life, this product must not be disposed of with normal
household waste, but should be taken to a collection point for the recycling of
electrical and electronic devices. This is shown by the symbol placed on the
product, operating manual or the packaging. The materials used in the device
can be reused according to their intended use. By reusing materials or
conducting other forms of using used devices, you make a significant
contribution to the protection of our environment.
Local administration will provide you with information about the
appropriate point for disposal of used devices.
Publicidad
