Daewoo DALL18-1 Manual Del Usuario página 5

1. SAFETY INSTRUCTIONS
Read the enclosed safety warnings, the additional safety warnings and the instructions. Failure to
follow the safety warnings and the instructions may result in electric shock, fire and/or serious
injury. Save the safety warnings and the instructions for future reference.
The following symbols are used in the user manual or on the product:
Read the user manual.
Denotes risk of personal injury, loss of life
or damage to the tool in case of non-observance
of the instructions in this manual.
Risk of electric shock.
Protection class III.
IP20 Protection class IP20.
The light produced by this flash light is
extremely bright.
Do not look directly into the light. This may
momentarily impair your vision.
Do not continue working if your vision is affected.
Do not cover the lens while operating the
flash light. This may cause the flash light to overheat.
Do not use in rain.
Indoor use only.
The LEDs are not replaceable.
Do not dispose of the product in unsuitable containers.
The product is in accordance with the applicable safety standards
in the European directives.
2. SAFETY WARNINGS FOR WORK LIGHT
a) Please read and observe all safety warnings and instructions enclosed with the battery or the
power tool with which the battery was provided.
b) Do not work with the cordless worklight in hazardous areas.
c) After the automatic shut-off of the cordless worklight, do not continue to press the On/Off
button. The battery could become damaged.
4