Daewoo DALL18-1 Manual Del Usuario página 7

5. ASSEMBLY
Before any work on the power tool, remove the battery.
The battery must be charged before first use.
Inserting the battery into the machine (Fig. B)
Ensure that the exterior of the battery is clean and dry before connecting to the
charger or machine.
1. Insert the battery (6) into the base of the machine as shown in Fig. B.
2. Push the battery further forward until it clicks into place.
Removing the battery from the machine (Fig. B)
1. Push the battery unlock button (5)
2. Pull the battery out of the machine like shown in Fig. B.
6. OPERATION
On/Off switch (Fig. A)
• Press the on/off switch (1) once to turn the work light on.
• Press the on/off switch (1) again to turn the work light off.
Pivoting head (Fig. C)
The pivoting head (2) can be positioned within a range of 128º as desired by swiveling it up or
down.
Setting the angle of diffusion (Fig. D)
You can set the angle of diffusion by turning the lens plate (3) to one of 2 positions.
Carrying handle (Fig. E)
The cordless work light can be carried or fastened
to an object with the carrying handle (4).
7. MAINTENANCE
Before cleaning and maintenance, always switch off the machine and remove the battery
pack from the machine.
Clean the machine casings regularly with a soft cloth, preferably after each use. Make sure that the
ventilation openings are free of dust and dirt. Remove very persistent dirt using a soft cloth moiste-
ned with soapsuds. Do not use any solvents such as gasoline, alcohol, ammonia, etc. Chemicals
such as these will damage the synthetic components.
8. ENVIRONMENT
Faulty and/or discarded electrical or electronic apparatus have to be collected at
the appropriate recycling locations. Only for EC countries.
Do not dispose of power tools into domestic waste.
3 6