Publicidad
Idiomas disponibles
Idiomas disponibles
• Switch off the engine and pull out the mains plug
when leaving the workplace.
• All protection and safety equipment must be reas-
sembled immediately after repair or maintenance
work is completed.
• The safety, operating and maintenance information
of the manufacturer, as well as the dimensions spec-
ified in the technical data, must be observed.
• The applicable accident prevention regulations and
the other generally accepted safety rules must be
observed.
• Do not use low-output machines for heavy work.
• Do not use the cable for purposes for which it is not
intended!
• Make sure that you have secure footing and always
maintain your balance.
• Check whether the moving parts function faultlessly
and do not jam or whether parts are damaged. All parts
must be correctly mounted and all conditions must be
fulfilled to ensure fault-free operation of the tool.
• Damaged protective devices and parts must be
repaired properly or replaced by a recognised spe-
cialist workshop unless otherwise specified in the
usage instructions.
• Have damaged switches replaced by a customer
service workshop.
• This tool conforms to the applicable safety regula-
tions. Repairs may only be performed by an elec-
trician using original spare parts. Otherwise, acci-
dents can occur.
• If necessary, wear suitable personal protective
equipment. This could include:
- Hearing protection to avoid the risk of becoming
hearing impaired;
- Respiratory protection to avoid the risk of inhaling
harmful dust.
• The operator must be informed about the conditions
that influence the noise generation.
• Errors in the machine must be reported to the per-
son responsible for safety as soon as they are dis-
covered.
• This device is not designed to collect dangerous dust.
• This device is not designed to be operated by per-
sons (including children) with impaired physical,
sensory or mental capabilities, or who have insuf-
ficient experience and/or insufficient knowledge
unless they are being supervised by a person who
is responsible for their safety or they are receiving
instruction about how this device is to be used. Chil-
dren should not be left unattended, to ensure they do
not play with the device.
16 | GB
Residual risks
The machine has been built according to the state-
of-the-art and the recognised technical safety re-
quirements. However, individual residual risks can
arise during operation.
• Risk to health from wood dust or wood chippings.
Wearing personal protective equipment such as pro-
tective goggles and dust masks is mandatory.
• Dust inhalation may occur when closing and chang-
ing the dust collection bag. Please note the instruc-
tions concerning proper disposal in the operating
manual (e.g. the use of P2 dust masks) to prevent
dust inhalation.
• Risk to health due to noise. The permissible noise
level is exceeded during operations. It is essential
that personal protective equipment, such as hearing
protection, is worn.
• Hazard due to electrical power, with the use of im-
proper electrical connection cables.
• Furthermore, despite all precautions having been
met, some non-obvious residual risks may still re-
main.
• Residual risks can be minimised if the "Safety In-
structions" and the "Intended Use" together with the
operating manual as a whole are observed.
Warning! This power tool generates an electromag-
netic field during operation. This field can impair active
or passive medical implants under certain conditions.
In order to prevent the risk of serious or deadly injuries,
we recommend that persons with medical implants
consult with their physician and the manufacturer of
the medical implant prior to operating the power tool.
Ensure careful storage of the safety instructions.
5. Technical data
Technical data
Dimensions L x W x H
Overall height
with filter bag
Extraction port
diameter
Hose length
Wheel diameter
Weight
Air power
www.scheppach.com
830 x 520 x 1600 mm
1600 mm
100 mm
2300 mm
150 mm
approx. 19,7 kg
1150 m
/h
3
Publicidad
