Publicidad
Idiomas disponibles
Idiomas disponibles
ENGLISH
9. UTILIZATION THE TRIMMER AS AN EDGER
For edging of driveways and paths, transform the trimmer from the trimmer mode to the edging
mode as follows:
(1) Remove battery pack from the battery holder.
(2) Hold the tube of the trimmer with one hand and push the rotation button by another hand.
(Fig.11A/ Fig.11B)
(3) Rotate the tube 180º until it locks in the edging mode. (Fig.11C).
Fig. 11A
Fig. 11C
WARNING: To prevent accidental starting which may cause serious personal injury, always
remove battery pack from the battery holder before attempting to rotate the shaft.
10. REPLACEMENT OF THE CUTTING LINE CARTRIDGE
Your trimmer is supplied with a fully disposable cutting line cartridge which overcomes troublesome
rewinding of the cutting line.
To replace an empty cutting line cartridge, press both of the cap release latch on the cap and boost
up it out of the spool holder (Fig.12A). Then remove the spool out (Fig.12B). Take the spring into the
Fig. 11B
10
Publicidad
