Steinbach Digitales Funk Pool Thermometer Operación Manual página 23

Establishing wireless connection
1. During the transmitter search, place the indoor and outdoor unit approximately 1.5 m
from possible sources of interference (electronic devices and radio equipment).
2. Repeatedly press the CH button
The channel display
selected outdoor unit. The temperature measured at the outdoor unit is displayed on
the display of the indoor unit next to the outdoor temperature symbol
Alternating channel display
1. Repeatedly press the CH button
The channel display
2. Press the CH button
Alternating channel display is activated. The temperatures of the outdoor units are
displayed alternately at 5-second intervals.
3. Press the CH button
Alternating channel display is deactivated. The channel display
outdoor temperature symbol
unit that has been assigned to "CH1".
.
4
(indoor unit) shows the same channel that is set at the
7
.
4
shows "CH3".
7
again.
4
.
4
indicates the measured temperature of the outdoor
9
.
9
displays "CH1". The
7
23