Publicidad
Idiomas disponibles
Idiomas disponibles
AUTOMATIC PRE HEATING
This function simpli es the cooking process as it obviates the need for
human intervention.
The cooking zone is rst preheated at maximum power to rapidly bring
the zone up to the cooking temperature after which the power is
automatically reduced to the preset level (Tab. 1).
POWER LEVEL
AUTOMATIC PRE HEATING
1
2
3
4
5
6
7
8
9
ACTIVATING THE AUTOMATIC PREHEATING FUNCTION
•
Select the cooking zone by pressing key (2).
•
Select power level 9 using the
a decimal point, using the
•
Select the desired power level, e.g. 6, using the
preheating mode, the cooking zone display will alternately show
the set level (6) with a decimal point (13).
CHANGING THE POWER LEVEL SETTING DURING AUTOMATIC
PREHEATING
The relative cooking zone must be on. The decimal point (13) on the
corresponding display must be lit up.
The heating value can only be increased with the
increased, the new preheating time will be calculated taking account
the time elapsed since the previous setting.
Example: Level 1 is the rst selected, corresponding to a preheating time
of 1' 11".
After 30", the power level is increased to 4, which requires a preheating
time of 5' 28".
After changing the level, the automatic preheating will last a further
4'58" (5' 28" - 30 = 4'58').
DEACTIVATING THE AUTOMATIC PREHEATING FUNCTION
The relative zone must be on.
The decimal point (13) on the corresponding display must be lit up.
•
Press
(4) after the function has been activated for at least
10 seconds.
TIMER FUNCTION
This automatic function also obviates the need for human intervention
during the entire cooking cycle. The cooking zone is automatically
switched o after the set time period.
FUNCTION
1' 11''
2' 44''
4' 47''
5' 28''
6' 29''
1' 11''
2' 44''
2' 44''
-
key. Then select level 9 with
key.
key. In automatic
key. If the level is
ACTIVATION OF THE TIMER FUNCTION
The zone to be programmed must be on.
•
Select a level between 1 and 9.
•
Press the timer key (7), the timer display will show 00.
•
Select the cooking time (from 0 to 99 minutes) using keys
(5 and 4). The timer function is automatically activated within
a few seconds.
The indicator light (11) corresponding to the programmed zone
illuminates.
•
Hold pressed the
The timer function applies to all hob zones.
CHANGING A PREVIOUSLY SET COOKING TIME
The programmed cooking time may be changed at any time.
The relative zone must be on.
The corresponding display ashes together with the LED corresponding
to the zone timer (11).
•
Press the timer key (7).
•
Set a new cooking time using the keys
•
Hold pressed the
TURNING THE TIMER FUNCTION OFF
When the set cooking time has elapsed, an audible signal sounds for
2 minutes. To interrupt the signal, simply press any key.
The cooking zone is now switched o .
If you want to interrupt the timer before the programmed time period
has elapsed, the relative zone must be on.
•
Press the timer key (7).
•
Zero the time by pressing
The timer is now deactivated but the cooking zone will remain on until
it is switched o manually.
RAPID SWITCH OFF
1.
The relative zone must be on.
2.
Press keys
and
switched o immediately. The timer will also be deactivated.
– 11 –
or
keys to rapidly adjust the cooking time.
and
(5 and 4).
or
keys to rapidly adjust the cooking time
(4).
(5 and 4) simultaneously; the cooking zone is
EN
and
Publicidad
