Publicidad
After removing plate compactor from pallet and packaging, there is no assembly.
The operator must be familiar with the location and operation of all controls. In a safe and well-ventilated area
preform the following:
1. Check entire machine for loose or missing hardware. Contact MARSHALLTOWN Customer Service
at 800-888-0127 if any pieces are missing.
2. Check the fuel filter and inspect air filter.
3. The plate compactor comes filled with exciter oil, so there is no need to check oil level. See Scheduled
Maintenance for oil replacement schedule (page 11).
4. The throttle cable/lever comes connected to the handle (A) and carburetor (B). Move throttle lever and watch
movement on the carburetor to insure correct operation.
5. The plate compactor ships with engine oil, but
check prior to starting.
8 of 31
104 S. 8th Ave. Marshalltown, IA Phone 800-888-0127 / 641-753-0127 • Fax 800-477-6341 / 641-753-6341 www.MARSHALLTOWN.com
PRE-OPERATION CHECKS
A
6. Correct belt tension can be checked by using
moderate pressure to squeeze both sides of belt.
Approximately 1" of movement is correct tension.
Loosen engine mounting plate and adjust to
correct belt tension. Retighten.
B
WS2732revB
Publicidad
