Publicidad
Idiomas disponibles
Idiomas disponibles
10.4 Brakes
Stop wheels before getting in/out, stretching out or getting on lift. Pull completely lever up to stop
chair. If correctly done, brakes press 5/6 mm against the rubber. If needed, use the equipment key
to unscrew nut wile clamping bit forwards and backwards. Fix correctly nut. to adjust brakes.
10.5 Wheels
10.6 Carrying
The wheelchair has been designed to be easily carried.
Once the wheelchair are closed, you can positioned it in the car boot, for example. If this can't be
possible, position the wheelchair in front of the car rear seat so that it is stable and cannot slip or
slide. Lock the wheelchair with the seatbelt.
11. MAINTENANCE
The ARDEA ONE devices by Moretti are checked carefully and supplied with EC mark, once laun-
ched on the market. For patient and physician's safety we recommend to let check the device by the
manufacturer or by laboratory authorized every 2 years. In case of repair use only original spare
parts. Before using follow the "BEFORE USE" chapter. Moretti ARDEA ONE wheelchairs require
few elementary and periodic maintenance, below we list the checks to be carried out periodically.
•
Braking capacity - Monthly
•
Seat cleaning – As needed
•
General check by qualified staff– Biennial
•
Pressure tyre – Monthly (if provided)
12. CLEANING AND DISINFECTION
12.1 Cover and padding
The cover and padding are in Nylon. Clean with warm water and mild soap.
12.2 Frame and metallic parts
Clean with warm water and mild soap. Dry with a soft cloth in order to not scratch the painting.
12.3 Brakes and wheels
Clean the wheels with warm water and mild soap. Pay attention in drying the wheels, it's dangerous
use the wheelchair with wet wheels.
12.4 Disinfection
if you need to disinfect the device use a common disinfectant cleaner
Note:
Do not use solvent and abrasive product
The wheels must be periodically checked and lubricated if necessary. Re-
move the fork taking out the screw and lubricate the peg. Remove the
wheel from the fork as well and lubricate the pegs. Assembly again the
wheel and the peg and tighten the screws well.
7
Publicidad
