Publicidad
Idiomas disponibles
Idiomas disponibles
Anti-Splinter Insert
To minimize splintering of the top surface of
the material being cut, place the JA1013 anti-
splinter insert (18) in the blade opening of the
footplate (12) (Fig. 6).
Note: This insert will only work with blades
that have ground sides such as T301CD, T101B,
T101D, and T101DP.
Dust Cover
Fit the hood before you connect the power tool
to the dust extraction system.
Attach the hood (19) to the power tool so that
the bracket locks into place on the shock protec-
tion guard (1) (Fig. 7).
Remove the hood (19) when working without
a dust extraction system, blade installation/
removal, and for miter/bevel cuts. To do this,
pull the hood forwards off the shock protection
guard (1).
Connecting The Dust Extraction
Fit the extraction outlet (20) in the recesses of
the base plate (12). Rotate the Allen wrench
head clockwise to allow connection of the ex-
traction outlet (20). Connect a dust extraction
hose (not included) to the extraction outlet (20)
(Fig. 8).
Switch off the sawdust blower device when you
have connected the dust extraction system.
160992A7EF_GST18V50_202203.indd 11
Assembly
Fig. 6
(18)
Fig. 7
(1)
(19)
Fig. 8
-11-
(12)
(20)
(12)
3/25/22 11:47 AM
Publicidad
