Ashley Signature Design 2160412 Manual Del Usuario página 5

7. Plug the Lumbar and Headrest, See the Figure D. If your model is Headrest Only, you only need to plug the Headrest.
Figure E
Headrest
8. Connect the Power Transformer cable to the corresponding plug coming from the back of the chair Figure A #4
9. Connect the Power Cord into the Power Transformer Figure A #5
10. Connect the power cord into an electrical outlet near where the chair will be used Figure A #6
WARNING:
If the chair is not func�oning, check the plug in and connec�on of the cords first (The order is A-B-C), see the Figure A.
Be sure cords are clear from the chair prior to opera�on.
FLOOR GLIDES
Your Ashley Power Chair has four adjustable floor glides. These glides can be adjusted to level your chair on uneven flooring. Remove these floor
glides may result in damage to your chair and flooring.
TROUBLE SHOOTING
-PROBLEM
Chair will not operate
-POSSIBLE FACTORS
Transformer may not be connected
-SOLUTIONS
Ensure both wire from the chair and the power cord is firmly connected to the transformer
Figure F
Power Code
OPTIONAL LITHIUM BATTERY PACK:
By adding the lithium ba�ery pack to the power transformer, it enhances your exis�ng power transformer with ba�ery back-up feature.
If you wish to purchase the lithium ba�ery pack, please contact us at 1-844-696-6886.
SIGNATURE DESIGN BY ASHLEY
Lumbar
Clear area below chair before lowering to reduce risk of injury or death.
Power Transformer
All Rights Reserved.
Lumbar
Headrest
Wire from the Chair
Aug. 2022
00172D Page 5 Of 26