Publicidad
Idiomas disponibles
Idiomas disponibles
Components Name and Basic Operations
Components Name and Basic Operations
Putting the unit in standby
1
Display the source/option selection
screen.
From the Home screen (page 4), touch as
follows:
2
Put the unit in standby.
On the source/option selection screen (page 10):
Turning off the screen
On the monitor panel
(Hold)
To turn on the screen: Press the DISP OFF button on
the monitor panel or touch the screen.
On the pop-up menu
To turn on the screen: Touch the screen.
Adjusting the volume
You can adjust the volume (00 to 40)
by pressing VOL
J
K
pressing VOL
to decrease.
• When volume level is below 15,
holding VOL
J
volume continuously to level 15.
Attenuating the sound
On the source control screen:
To cancel attenuation:
Initial settings
When you power on the unit for the first time or
initialized, the <Initial Setup> screen appears.
Perform the initial settings.
Initial Setup
Demonstration
ON
OFF
Language
English
Front Camera
Enter
Rear Camera
Enter
User Customize
Enter
Enter
Viewing Angle
Enter
Once completed, Home screen appears.
<Demonstration>
to increase and
• ON (Initial): Activates the display demonstration.
• OFF: Deactivates the display demonstration.
<Language>
increases the
Select the text language used for on-screen
information.
• English (Initial)/Español/Français
• GUI Language (Local (the language selected above)
(Initial)/English): Selects the language used for
displaying operation keys and menu items.
<Front Camera>
Make the settings to display the picture from the
connected front view camera.
<Rear Camera>
Make the settings to display the picture from the
connected rear view camera.
<User Customize>
Change the display design.
<Viewing Angle>
Select the viewing angle in relation to the monitor to
make the image on the screen easier to see.
• Under 0° (Initial)/5°/10°/15°/20°
Finish
ENGLISH
5
Publicidad
