Publicidad
Idiomas disponibles
Idiomas disponibles
MAINTENANCE
Prior to performing any maintenance, ensure unit
is OFF and disconnected from power supply.
Recommended operator checks prior to use:
1.
BODY OF MACHINE – Wipe down with a clean, damp cloth.
2.
POWER CORD – Regularly inspect sheath, plug, and cord anchorage for
damage or loose connection. Only replace power cord with OEM specified
replacement part.
3.
BRUSHES – For maximum life, wash the brushes regularly. Ensure machine is
in TRANSPORT MODE when not in use. Store additional brushes in a vertical
position to avoid bending of bristles. Check for permanent bending of bristles
in a particular direction. This may occur if the machine is not operated for
several days without removing the brushes which is not recommended. If this
occurs, reverse the brush so that the bent bristles can flex back to original
position.
4.
WIPER BLADE – After an extended period of use, the wiper blade may wear.
If this occurs, the water collection performance will decrease and should be
replaced by an authorized service center.
5.
SOLUTION FEED FILTER – The filter prevents clogging of the pump and spray
nozzle and should be periodically cleaned.
6.
NOZZLE MAINTENANCE – If the spray of the nozzle becomes blocked, slide
the nozzle cover off and remove the nozzle. Wash the nozzle in clean water
ensuring that the nozzle is clear prior to refitting.
Besides those outlined above, all additional servicing
and repairs should only be performed by an
Authorized Tornado Servicing Agent.
Side Brush Installation:
1.
Remove the front brush and brush shaft.
2.
Fix the shield assembly on the side plate.
3.
Insert the side brush shaft through the
shield and main brush.
Side Brush Use:
1.
Tilt the machine at an angle that will allow
the rear brush to collect the dirty water.
2.
Use side brush only for washing edges
and corners of floor.
24
ACCESSORIES
Do not use side brush in a room without mop
boards. Walls will get dirty.
The side brush can be used to clean corners near the walls.
UNPLUG MACHINE PRIOR TO SIDE BRUSH INSTALLATION.
25
Publicidad
