Publicidad
Idiomas disponibles
Idiomas disponibles
www.tmelectron.com
slightly when switched on the first time. After a short while, this will cease.
4. General instructions
When using the iron for the first time, you may notice a slight emission of
smoke and hear some sounds made by the expanding plastics. This is quite
normal and it stops after a short time. We also recommend passing the iron
over an ordinary cloth before using it for the first time.
1. Check the ironing instructions on the garment to be ironed.
2. Fabrics that have some kind of finish (polishing . wrinkles , contrasts....)
can be ironed at the lowest temperatures.
3. If the fabric contains several kinds of fibres,always select the temperature
applicable, if an article contains 60% polyester and 40% cotton,you must
always choose the temperature corresponding to polyester and without
steam.
4. First classify the articles to be ironed according to the most suitable ironing
temperature: wool with wool, cotton with cotton, etc. as the iron heats up as
fast as it cools, start by ironing the articles requiring the lowest temperature
such as those made of synthetic fibres. Progress towards those that require
the highest temperatures.
5. Turn the temperature control until it is in front of the appropriate signal
according to the following:
·
position for nylon and acetate
··
position for wool ,silk or mixures
···
position for cotton or linen (steam)
5. How to fill the water tank
1. Unplug the iron.
2. Set the steam slide switch to dry ironing.
3. Fill the tank through the filling hole.
4. If you have hard water, it is advisable to use only distilled or demineralized
water.
13
ENGLISH
Publicidad
