Use
When switching the toaster on for the � rst
time, set the toaster to its maximum setting
but without any bread in it. Do this twice
ir order to burn off any residual smells. To
switch it on, set the timer to the desired
position and press the ON switch (1). The
pilot lamp will light up, indicating that the
appliance is working. when it reaches the
set time, the appliance will automatically
switch itself off , along with the pilot lamp
and a buzzer will sound.
Toasting can be interrupted at any time by
pressing the OFF switch (2).
Turn the selector to the desired setting (1-6).
1- shortest toasting time
6- longest toasting time.
TYPES OF BREAD:
Thanks to its design the toaster accepts all
types of sliced bread, including � apjacks
and similar products such as croissants and
pastries.
The selected toast setting may vary
depending on the water content of the
bread that you are using.
Caution:
This appliance is not suitable for any other
use nor for testing frying or heating any
other type of food other than that stated in
the paragraph above.
Cleaning
Check that the appliance is unplugged from
the mains and completely cold. Clean the
outer casing with a Damp cloth. Never let
water get inside the toaster, nor insert any
metal objects in through the bread slot.
Never use abrasive cleaning products.
CRUMB REMOVAL:
Open the crumb catcher tray and remove
the contents.
Important: Always unplug the toaster from
the mains before doing this.
CABLE COILER:
The mains cable can be wound around the
able tidy located on the base of the toaster.
REPAIRS:
Should the appliance become defective,
do not hesitate in taking it along to an
authorized technical service centre.
GB
15