Hupfer BTH/60-60 Manual De Instrucciones página 35

Safety Instructions
Safety Instructions for Appliance Safety
2.3 Safety Instructions for Appliance Safety
Safe operation of the appliance depends on appropriate and thorough use. Negligent handling of the appli-
ance can lead to danger to life and limb of the user and / or third parties as well as hazards to the appliance
itself and the other operator's property.
The following points are to be observed to ensure the appliance safety:
The appliance may only be operated as intended, when it is in perfect condition with regards to tech-
nical standards, with awareness of safety and hazards and in accordance with the operating instruc-
tions.
All the operating and actuating elements must be in a perfect and functionally reliable condition with
regards to technical standards.
The appliance must be checked for external visible damages and defects whenever it is put into op-
eration. In case of damages, inform immediately the competent bodies and switch off the Mobile
Cutlery Soak Sink.
Modifications or retrofits of the equipment are only permitted in consultation with the manufacturer
and on receipt of his written agreement.
The appliance is provided exclusively for manual transport. Transport using any kind of devices is not
permitted. Risk of injury and damage.
Release both total brakes before commencing transporting. Moving the appliance with the total
brakes locked can damage the chassis.
Transport should only be undertaken over level floors. Moving the appliance over very uneven floors
and stair steps can damage the chassis.
Do not stop the Mobile Cutlery Soak Sink by applying the total brakes. The total brakes are designed
to be able to prevent the appliance from unintended moving. Do not stop the appliance on sloping
floors. Secure the appliance against rolling away by applying both total brakes when stopping it.
When approaching walls and moving round obstacles always pay attention to persons in the way.
Risk of injury.
When transporting the appliance, always hold both push bars with your hands. Never let go of the ap-
pliance while moving it.
When transporting the appliance, do not move it faster than a walking pace. Heavily laden appliances
are difficult to brake and steer. If necessary, ask for assistance when transporting the appliance.
If the Mobile Cutlery Soak Sink tips over due to outside influences or inattention, never catch it manu-
ally. Risk of injury.
In the case of off-site transport in a vehicle such as a lorry, the appliances should be secured prop-
erly. The total brakes are not sufficient as a transport securing method.
Before transporting, switch off the appliance, pull out the mains plug and insert it into the holder pro-
vided.
Never pull the mains plug out of the socket by the connecting lead.
Never move the appliance by pulling by the connecting lead.
If the mains plug has come into contact with water it must be dried before inserting it into the socket.
Danger to life.
Damaged mains plugs or the connecting lead are to be replaced by authorised personnel before the
appliance is reused.
Do not use any extension leads in wet and damp areas.
4330030_A1
All manuals and user guides at all-guides.com
Chapter 2
Page 9
Mobile Cutlery Soak Sink
BTH/60-60