Publicidad
Idiomas disponibles
Idiomas disponibles
Chapter 7
Page 24
Remove layers of lime scale, grease, starch and egg-white daily by cleaning. Corrosion can occur
underneath these layers due to lack of air admission.
After each cleaning operation remove all cleaning agent residues by wiping thoroughly. Afterwards,
the surface should be thoroughly dried.
Do not bring parts made from stainless steel into contact with concentrated acids, seasonings, salts
etc. for longer than is absolutely necessary. Acid fumes which generate during cleaning of tiles also
promote the corrosion of "refined stainless steel".
Avoid damaging the surface of the stainless steel, particularly by metals other than stainless steel.
Residues of extraneous metals produce extremely small amounts of chemical elements which can
cause corrosion. In any case, contact with iron and steel should be avoided because that leads to ex-
traneous rust. If stainless steel comes into contact with iron (steel wool, steel particles from pipes, wa-
ter containing iron), this can be a trigger for corrosion. Therefore, for mechanical cleaning use exclu-
sively refined steel wool or brushes with natural, plastics or refined steel bristles. Steel wool or
brushes with unalloyed steel lead to extraneous rust due to abrasion.
Mobile Cutlery Soak Sink
BTH/60-60
All manuals and user guides at all-guides.com
Cleaning and Care
Special Care Instructions
4330030_A1
Publicidad
