Descargar Imprimir esta página

SEVERIN SM 3735 Instrucciones De Uso página 11

Ocultar thumbs Ver también para SM 3735:

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 24
∙ Every time the appliance is used, the
main body including the power cord as
well as any attachment fitted should
be checked thoroughly for any defects.
Should the appliance, for instance, have
been dropped onto a hard surface, or if
excessive force has been used to pull
the power cord, it must no longer be
used: even invisible damage may have
adverse effects on the operational safety
of the appliance.
∙ The appliance should only be placed on
a level surface. Do not allow the housing
or its power cord to come into contact
with open flames or any hot surfaces
such as hot-plates.
∙ Do not let the power cord hang free.
∙ Caution: Do not fit the blade unit onto
the motor unit without a blender jug
fitted.
∙ Do not touch any moving parts during
operation - this can be extremely
dangerous.
∙ When removing the plug from the wall
socket, never pull on the power cord;
always grip the plug itself.
∙ No responsibility will be accepted if
damage results from improper use, or if
these instructions are not complied with.
Blender jugs
∙ This appliance comes with two blender
jugs and two lids. For practical storage,
the lids may be attached to the base
of the jugs. To close a jug, fit the lid
und screw it on tight. In that way, the
smoothie can be conveniently stored or
carried, using the handle.
∙ By lifting up the rubber stopper, the
smoothie can be poured out directly
from the jug.
Before using for the first time
Before the appliance is used for the first
time, the blender jugs and the blade unit
must be thoroughly cleaned, as described
in the section Cleaning and care.
Short-term operation
The appliance is designed to process
average domestic quantities of food; it
can be operated without interruption for
a maximum of 2 minutes, after which it
should be allowed to cool down to room
temperature.
Safety switch
A special safety switch in the motor unit
ensures that the appliance cannot be
activated unless a blender jug has been
properly fitted; otherwise, the motor will not
start when the jug is pushed down.
Operation
∙ Cut the ingredients into cubes of about
15 mm and put them into the blender
jug.
∙ For best results, the following sequence
should be observed when putting the
ingredients into the jug:
1. liquids
2. fresh ingredients
3. frozen ingredients
4. yoghurt/ice-cream
∙ The jug has a maximum capacity of
600 ml.
∙ Screw the blade unit clockwise onto the
blender jug.
11

Publicidad

loading