Livoo DOH133 Manual De Instrucciones página 17

Idiomas disponibles

Figures 2

Left brush ( center in grey color)

Right brush ( center in yellow color)

Vacuum front

Use of the device

To charge the appliance

Plug in adaptor with power supply, the button indicator light is flashing, the charging connection is

successful. Time for first charging: 8h

TIPPS

Please remove thread and other debris scattered on the ground before using avoid trip or wind the

appliance.

Please remove the side brushes before using machine on the carpet

This product can be use on wood floor, tile floor and cement floor and short hair carpet(less than 1cm)

You can change the left and right brushes (use screwdriver to remove and fix the brush), they cannot be

interchanged.

Use

1. Turn on the appliance switch on/off button, button indicator lights up.

2. Press the on/off button on the appliance or on the remote control, the appliance starts to vacuum.

Press again and it stops working.( Figure 3)

3. When you want to stop vacuum, turn off power switch.

4. The appliance can also be used with the microfiber provided, which has been moistened before for

more effective cleaning.

Cleaning and maintenance

Suction inlet and side brush cleaning

Clean suction inlet with microfiber (Figure 4)

Use screwdriver to remove side brushes and clean them (Figure 5)

Microfiber cleaning

Clean and dry it after use

Dust tank cleaning

Take out dust tank and clean it with water and dry it with soft clean cloth (Figure 6)

Other parts cleaning

Clean the cliff sensors to keep the sensitivity (Figure 7)

Clean the gap between cover and bumper (Figure 8)

Clean universal wheel to reduce noise (Figure 9)

www.livoo.fr