Beper P206VEN151 Manual De Instrucciones página 11

3 in 1 Standing Fan Use Instructions EN
Children must not play with this appliance.
Cleaning and maintenance cannot be carried out by unsupervised
children.
For the safety of children and pets, remove and dispose of all
packaging material before use.
This fan is intended for home use only, as described in this manual.
Any other use is to be considered improper and, therefore, dange­
rous.
Description of product
1. Front grid
2. Blades
3. Back grid
4. Central disc
5. Main unit
6. LED display
7. Upper standing pole
8. Lower standing pole
9. Base
10. Blade blocking bolt
11. Back grid blocking bolt
12. Grid blocking screw
13. Grid blocking clip
Assembling Fig. A
Place the base on a flat and stable surface. Proceed as shown in Fig. A (from a to c)
Make sure that all components are well fixed, to avoid dangerous vibrations and movements during operation.
Install both standing poles to assemble the fan at its maximum height; for medium height, proceed as shown
in Fig. A but taking away the lower standing pole and fastening the upper standing pole directly to the base;
for minimum height, proceed as shown in Fig. A, but fixing the main unit directly onto the base, taking away
both upper and lower standing poles.
Operation Fig.B
1. Display
2. ON/OFF key
3. Speed selection key
4. Timer key
5. Mode selection key
6. Swing function key
Connect the fan to a wall socket; the fan produces a beep sound, enters stand by mode and the display
shows the room temperature.
Press the ON/OFF key to switch the fan on, which will start operate at minimum speed.
Press the speed selection key to set the fan speed, which will be shown on the display (1/Minimum ­ 2/Me­
dium – 3/High)
The display will show the selected speed for a few seconds, and then will go back to showing the room tem­
perature. Press the timer key to set the auto shut off time of the fan; display will show the time selection for a
few seconds, and then will go back to showing the room temperature.
Auto shut off time can be set from 00 to 12 hours, when timer goes off the fan will automatically switch off.
To select fan mode, press the mode selection key:
F1/Normal: the fan operates at the selected speed constantly, until shut off
F2/Nature: the fan mimics natural breeze by alternating all speeds in cycle
F3/Sleep: the fan speed reduces by one level every half hour, and then settles on minimum level until shut off.
11