Orbegozo RM 1000 Manual De Instrucciones página 11

RM 1000 / RM 1500 /
RM 2000
left to place it in its final position (pic 2). In this way, to remove the radiator you should
move it to the right and then pull up.
- To prevent the device touch the wall, install the black plastic block in the back of the
radiator. Match the block's hole with the hole in the radiator and screw it (pic. 3).
- To transport the radiator install the provided handles. Blend them to introduce the legs
into the slots in the top on the radiator (pic. 4)
MANUAL
• Connect the device to the network.
• Turn the thermostat control knob in the direction of clockwise into position maximum .
• Turn the power selector to the desired position. The indicator light will illuminate.
− Position "I": Minimum power.
− Position "II": Average power.
− Position "III": Maximum power.
− Position "0": Off.
All manuals and user guides at all-guides.com
PIC 1
PIC 3
PIC 2
PIC 4
11