Publicidad
EN
j)
Keep packaging parts and small assembly parts out of
the reach of children.
k)
Keep the device away from children and animals
l)
When using this device together with other devices,
the other instructions for use must also be followed.
REMEMBER! Keep children and other bystanders
safe while operating the device.
2.3. PERSONAL SAFETY
a)
Do not operate the device if you are tired, ill or under
the influence of alcohol, drugs or medication which
might impair your ability to operate the device.
b)
The device is not intended to be used by persons
(including children) with reduced mental, sensory or
intellectual functions or lack of experience and/or
knowledge, unless they are supervised by a person
responsible for their safety or have been given
instructions by them on how to operate the device.
c)
Be careful and use common sense when operating
the device. A short moment of distraction during
operation may lead to serious personal injury.
d)
To prevent accidental start-up, make sure the switch
is in the OFF position before connecting the device
to the power source.
e)
The device is not a toy. Children should be supervised
to ensure that they do not play with the device.
f)
CAUTION! During operation, some parts of the
device can become very hot - there is a danger of
burns! Do not touch these parts with bare hands!
Finished dishes should be removed with tongs or
other kitchen utensils.
2.4. SAFE USE OF THE DEVICE
a)
Do not overload the device. Use tools that are suitable
for the given application. A correctly selected device
ensures better and safer performance of work.
b)
Do not use the device if the ON/OFF switch does
not function properly (does not switch on and off).
Devices that cannot be controlled by the switch
are dangerous, must not be operated and must be
repaired.
c)
Pull the plug out of the socket before making
adjustments, changing accessories or storing the
device. This preventive measure reduces the risk of
accidental activation.
d)
Keep unused devices out of the reach of children
and anyone not familiar with the device or these
instructions. Devices are dangerous in the hands of
inexperienced users.
e)
Keep the device in good working order. Before each
use, check for general damage or damage to moving
parts (cracks in parts and components or any other
condition that may affect the safe operation of the
device). If damaged, have the device repaired before
use.
f)
Keep the device out of the reach of children.
g)
Repair and maintenance of the device should be
carried out by qualified persons using only original
spare parts. This will ensure a safe use of the device.
h)
To ensure the designed operational integrity of the
device, do not remove factory-installed covers or
loosen any screws.
i)
When transporting and moving the device from the
place of storage to the place of use, follow the health
and safety regulations for manual transport that
apply in the country in which the device is used.
8
j)
It is forbidden to move, shift or rotate the device
during operation.
k)
Do not leave the switched on device unattended.
l)
Clean the device regularly to prevent the permanent
accumulation of dirt.
m)
The device is not a toy. Cleaning and maintenance
must not be performed by children without adult
supervision.
n)
It is forbidden to tamper with the device in order to
change its parameters or construction.
o)
Keep the device away from sources of fire and heat.
p)
When heating plastic vessels containing glue,
flammable materials, etc., harmful fumes and
vapours may be released.
q)
Place the device away from flammable materials and
at least 20 cm away from walls, windows, etc.
r)
Do not use the device to dry or dry objects.
s)
Do not leave food in a device when it is switched off.
Escaping moisture causes damage to the product.
t)
The operating instructions must be available and
users must be instructed on the intended use of the
device. The operating instructions must be available
at the place of use at all times.
u)
Use food-safe and non-scratch cooking utensils.
Never use sharp or metallic objects.
v)
When using the device, do not touch the heating
plate or housing - danger of burns. When opening
the hot device, be aware of escaping steam.
w)
Place the device on a heat-resistant surface!
CAUTION! Although the device has been designed
to be safe and has been equipped with adequate
safeguards, and despite the use of additional safety
measures, there is still a small risk of accident or
injury when operating the device. Caution and
common sense are advised when using the device.
3. RULES OF USE
The device is designed for baking waffles.
The device is designed for commercial use. It can be used in
restaurants, hotels, canteens, etc. It is forbidden to use the
device in continuous operation for mass food production.
The user is responsible for any damage caused by
improper use.
Rev. 02.08.2022
3.1. DESCRIPTION OF THE DEVICE
Front view:
1
2
3
4
5
7
9
6
8
Rear view:
12
11
10
1.
Handle
2.
Upper heating plate
3.
Swivel mounting element
4.
Lower heating plate
5.
Drip tray
6.
Timer
7.
Heating control
8.
ON/OFF switch
9.
Thermostat knob
10.
Potential equalisation connector
11.
Power supply cable
12.
RESET button
3.2. PREPARATION FOR WORK
LOCATION OF THE DEVICE
The ambient temperature should not exceed 40°C and
the relative humidity should not exceed 85%. Position the
device in a way that allows for good air circulation. Maintain
a minimum distance of 20 cm from every side of the device.
Keep the device away from any hot surfaces. Always operate
the device on a level, stable, clean, fireproof and dry surface
and out of the reach of children and persons with reduced
mental, sensory and intellectual abilities.
Rev. 02.08.2022
EN
Place the device on a heat-resistant surface! Do not place
any flammable objects near the device. Position the device in
such a way that the power supply plug can be reached at any
time. Make sure that the device's power supply corresponds
to the data on the rating plate!
The installation site must have adequate ventilation (e.g.
hood).
Before first use, disassemble all parts and wash them as well
as the whole device.
Fully unpack the device and remove the protective film
before first use. The packaging material may melt or catch
fire through contact with the hot device.
Assembly:
a)
Fit the handles using the screws and hex key.
b)
Place the drip tray on the device housing to prevent
dough from flowing out form between the heating
plates.
Potential equalisation connector
On the back of the device there is a potential equalisation
connector [10]. It is recommended to connect it to the
potential equalisation system before using the device. This
operation should be carried out by a qualified electrician.
3.3. WORKING WITH THE DEVICE
CAUTION! It is not recommended to eat the first few
prepared waffles.
CAUTION: Before using the device for the first time, wash
and grease the heating plates thoroughly and then preheat
the device without dough.
While the device is heating up there a little smoke may
appear - this is perfectly normal. You should only take care
of proper ventilation. After a few minutes, turn off the device
and wait until it cools down, then grease the heating plates
- the device is ready for use.
1)
Make sure that the thermostat knob [9] is set to „MIN"
and the I/O switch [8] is set to „O".
2)
Connect the device to the power supply.
3)
Switch on the device by setting the I/O switch [8] to
the „I" position.
4)
Turn the thermostat knob [9] to select the desired
temperature. The heating control [7] will light up and
the device will start heating. The heating elements will
automatically maintain the set temperature using the
thermostat. The heating plates should remain closed
while the device is heating up.
5)
The device is equipped with a timer [6]. It serves only
for timing (max. 5 min) and it does not influence the
other part of the device (it does not switch off the
device or stop heating after the set time). To set the
timer, turn the timer knob to the desired value. When
the selected time has elapsed, the device will emit
a signal.
6)
When the device has reached the set temperature,
carefully open the upper heating plate by grasping
the handle [1] (grease the heating plates if necessary),
spread a suitable amount of the previously prepared
dough on the lower heating plate, close the device
and by turning the handle spread the dough over the
heating elements. The maximum angle by which the
closed heating plates can be rotated is 180°.
7)
To remove the ready waffles, place the heating plates
in the initial position and carefully open the device
(watch out for high temperature). Waffles should be
removed with a spatula made of wood or plastic. Do
not use sharp metal objects, so as not to damage the
coatings on the heating plates.
9
Publicidad
