EN
Safety Precautions
Flying and installation of this amplifier must be carried out by qualified personnel following the
approved safety standards.
Do not attempt to clean the plastic enclosure with solvents or petrochemical based cleaners.
Do not place objects which are sources of heat on the speaker or amplifier such as lighting equipment
or smoke machines.
Do not expose the amplifier to direct rain or stand in water. Liquid getting into the box will risk
a short circuit and will be hazardous.
Additional precautions for Auto-amplified devices.
Before installation, ensure that the voltage and frequency of power outlet match the power requirements
of the amplifier
Make sure that the power-cord is never crimped or damaged by sharp edges. Never let the power-cord
come into contact with other cables. Only handle the power-cord by the plug.
Attention
Before connecting or operating your new amplifier, please study the accompanying instruction manual
paying special attention to the operating precautions and wiring procedure.
Pag. 1
MX 8300
User Manual/Manual de Uso