Publicidad
Idiomas disponibles
Idiomas disponibles
Hemming with the Cover Stitch
1. Fold up the edge of the fabric to the
2. Drawa line with a tailor's chalk on the
3. Place the fabric so the left needle
4. Sew carefully along the marked line.
5. After finishing sewing. Raise the
6. Draw the needle threads to the wrong
Triple Cover Stitch Applications
1. Hemming the sleeves
2. Attaching laces and tapes
30
wrong side and press.
right side of the fabric to mark the
fabric edge.
drops just to the left side of the marked
line. Lower the presser foot.
presser foot and remove the fabric to
the rear.
side of the fabric and knot them
together.
Marked line
Left needle
Right needle
Right side of the fabric
Sleeve
Tap or lace
Right side of the fabric
Reverse side of the fabric
EN
USER MANUAL
3. Attaching elastics
Right side of the fabric
Elastic
Reverse side of the fabric
4. Decorative stitch
Right side of the fabric
Reverse side of the fabric
MAINTENANCE OF THE MACHINE
TRIUMPHATOR 2000X
Cleaning the Feed Dogs and Looper
Area
WARNING:
Turn the power switch off and unplug
the machine before cleaning.
NOTE:
Do not dismantle the machine in any
way other than as explained in this
section.
1. Remove the presser foot and
needles.
2. Remove the set screw and needle
plate.
3. Clean the feed dogs with a
cleaning brush.
Needle plate
Set screw
Cleaning brush
31
Publicidad
