Publicidad
Idiomas disponibles
Idiomas disponibles
Instructions before installation
The manufacturer accepts no liability for any injury or damage to the product
resulting from:
• Incorrect assembly or connection, including excess voltage
• Incorrect maintenance or use of spare parts other than original spare parts
provided by the manufacturer
• Alterations to the product without express permission from the manufacturer
• Use for purposes other than those described in this manual
Dometic reserves the right to change product appearance and product
specifications.
6
Instructions before installation
➤ Before installation, check the roof thickness of your vehicle. Consult the vehicle
manufacturer if you have any questions.
➤ When choosing the installation location, observe the following:
– Adjoining components (roof rack or attachment and reinforcing parts), cables
and cabinets in the vehicle interior must not be damaged when sawing the
hole.
– Sufficient space needs to be available for installing the inner and outer frames.
– Only fit the roof light on flat and parallel interior and exterior roof areas with a
maximum inclination of 15° to the horizontal.
– You may use an existing roof hole provided the roof light fits into it.
6.1
Pressing out the hole
See fig. 2
6.2
Using the reinforcing rails
Supplementary to fig. 3
1. Before installation, check whether the roof hole needs reinforcing.
2. Remove the foam according to the width of your reinforcing rail (not in scope of
delivery) (A).
3. Fit the reinforcing rails (B).
6
Mini Heki Style
EN
Publicidad
