DAY Useful Everyday 73454 Manual De Instrucciones página 15

Only connect the fan heater to a single-
phase socket with a mains voltage as
speci� ed on the rating plate.
Do not leave your home while the appliance
is in function: ensure that the switch is in
OFF (0) position and the thermostat is in
minimum position. Always unplug the heater
when not in use. Do not pull the cord to
unplug the heater.
Keep the air inlet and outlet free from
objects: at least 1 m in front and 50 cm
behind the heater.
Do not let animals or children touch or play
with the fan heater. Pay attention! The air
outlet gets hot during operation (more than
80 °C).
The appliance must not be placed in rooms
where � ammable liquids or gases are used
or stored.
Keep the appliance clean at all times, and
never insert objects in the air intake or the air
outlet, as this may cause electrical shock, � re
or damage to the appliance.
The heater has a tilt function. The heater
stops heating as soon as it overturns, but the
fan will continue until it is turned off .
Installation
The appliance requires no installation,
it should be used solely as a portable
appliance.
Portable appliances are not suitable for use
in a bathroom.
Use
Check whether the switch on the back is off .
Connect the fan heater to the mains.
Turn on the red main power switch on the
back to put the appliance on standby.
Button operation instructions
Function selector:
1 push: Fan only, display indoor
temperature
2 push: Low heat with � ame lamp, display
indoor temperature
3 push: High heat with � ame lamp, display
indoor temperature
4 push: Off (fan will cool off appliance for
20 seconds)
Light button, on/off
1 push: Light off
2 push: Display off
3 push: Display and light on
Note! The light can only be turned on/off
when the heater function is on
Timer button, can be set to 15 min/
30 min/1 H/2 H. The appliance will
power off automatically after the set
time.
1 push: 15 min
2 push: 30 min
3 push: 1H
4 push: 2H
5 push: Timer off
GB
15