König Health Care HC-HM10 Manual Del Uso página 9

6. After setting up the weight, press SET key to enter into age value setup, the age value fl ashes,
and the initial value is 40 year; during the setup, every press of 5 or ° will increase or decrease
the age value by 1 year; Continuous pressing 5 or ° will fasten the setup. You can set up the age
value by the above method; and the valid value range will be: 10-99 year.
Information settings & measurement method
7. After setting up the age, press SET key to enter into gender setup, the gender information fl ashes,
and the initial gender is male; during the setup, every press of 'up' or 'down' will transform the
information between male and female; You can set up the gender information by above method;
and the valid types will be: male and female.
8. After setting up the gender, press SET key again to jump to step 3, i.e. change current information
group of the fat testing or look up other groups' fat testing information; The set up Method for other
groups are stated as in step 4 to 7; If you want to test the fat, please make reference to step9;
9. After setting up all the information, select the group to be tested and press the button of START.
Please stand up with separated feet and laterally raise your arms and stretch out. Grab the knobs
respectively with some strength, and changes on the screen, and amongst six patterns keep
coming up.
9