Descargar Imprimir esta página

Philips AUT3234 Manual Del Usuario página 3

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 17
I. Product Introduction
Congratulations on your purchase and welcome to Philips! Our under-the-sink
water filtration system AUT3234 comes with a 4-stage ultrafiltration, which
e ectively reduces particles, heavy metals, volatile organic compounds, pesticides,
bacteria, and pollutants down to 0.01 micron*, while retaining beneficial minerals
at the same time.
Read this user manual carefully before you use the appliance. Save it for future
reference.
* The substances removed or reduced by this system are not necessarily in all
user's water.
II. Product Specification
Product name
Product model
Water flow rate
Filtration capacity
Rated voltage
Inlet water pressure
Inlet water temperature
Applicable water source
** When the inlet water pressure exceeds 0.4 MPa, a pressure relief valve should
be installed before the system. When the inlet water pressure is below 0.1 MPa,
a pressure booster should be installed before the system. The pressure relief valve
and extra pressure booster need to be purchased separately.
Philips under-the-sink water filtration system
AUT3234
2 liters/minute
CBPA filter: 4000 liters
UF filter: 8000 liters
CB filter: 4000 liters
4.5V
0.1-0.4 MPa**
5℃-38℃
Municipal tap water, which meets all European
Directive on Water for Human Consumption 98/83
requirements and its national transpositions in
the various EU member states.
1

Publicidad

loading