Publicidad
Idiomas disponibles
Idiomas disponibles
FOR INSTALLATION WITH M5
HEAD AND CENTER SECTION
1.
The M5 Ford Leg comes pre-assembled, adjusted, and ready to install.
Determine which center section mounting holes to use to ensure a minimum of 6" clearance between the truck bed rail and
2.
the bottom of the trailer. ( For more detail, please refer to the GUIDELINES FOR MATCHING HITCH, TRUCK, AND
TRAILER section located in the head and center section instruction sheet.) Legs should be attached at same height on
both sides of unit. This unit has 4" of vertical adjustment.
3.
Using the (4) M16x2x40 mm Hex Head Bolts, attach the legs to the center section structure, threading the bolts from the
inside of the center section into the threaded portion of the legs. Finger tighten bolts initially until final adjustments are
made.
©
2018 Horizon Global America Inc.
Product Instructions
M5 FORD LEG
ASSEMBLY AND INSTALLATION
8
9
Page 2 of 21
30923N
Part Number:
30923
5
06/21/2022
Rev. B
08/15/2018
Rev. A
Publicidad
