Xiaomi Mi Vacuum-Mop 2 Pro MJST1SHW Manual De Usuario página 17

2. Open the dust compartment cover, and empty out the contents.
3. Remove the filter, and use the cleaning tool to clean the dust compartment and
the filter, and then wash them with clean water. Install the dust compartment
and the filter back after fully drying them.
Note: It is recommended to thoroughly clean the dust compartment at least once a week.
Make sure to fully dry the dust compartment and the filter before use (at least dry them for 24
hours).
Water Tank
Simultaneously press and hold both the release buttons of the water tank, and
then slide it out from the bottom of the vacuum-mop as illustrated.
Note: After mopping, immediately remove the water tank, empty out any remaining water, and
clean and dry the mop pad to prevent lingering odor and mildew.
Brush
1. Flip the vacuum-mop over and press and hold the two release buttons to
remove the brush cover.
2. Remove the brush upwards.
3. Pull out the brush bushing.
13
Water Tank Release Button