Publicidad
Idiomas disponibles
Idiomas disponibles
EN
DESCRIPTION
-
LED COB WHITE PAR spotlight
-
COB LED technology, supports long periods of operation, optimal heat management.
-
Operation in manual DMX control or master/slave mode.
CONTROLS AND FUNCTIONS
BACK AND SIDE PANEL
DMX IN
DMX OUT
1
1.- DMX IN: control signal input, 3 pin XLR connector.
2.- DMX OUT: control signal output, 3 pin XLR connector.
3.- POWER IN: 100-240 V AC power supply.
4.- SCREEN: shows the current mode of operation of the device.
5.- MODE: allows you to change the mode of operation.
6.-
SET : increases/decreases the value of the selected mode. To confirm the selection, press ENTER.
7.- ENTER: confirms the current value of the configured parameter.
CONNECTION AND OPERATION
NOTE: after switching off, this bulb needs 15 minutes to cool down before it can be switched on again.
Select the operation mode by pressing the MODE buttons. To make changes within a mode use the SET
buttons and press ENTER to confirm.
The following table shows you all the operating modes and the possible settings for each mode.
MODE
DMX CONTROL
d---
A---
MANUAL
u---
F---
INFO
t--
POWER IN
2
3
VALUE
FUNCTION
001-512
1 channel DMX control. Value: DMX address
001-512
3 channel DMX control. Value: DMX address
000-255
White intensity (u - - - ). Value: color intensity (000: minimum, 255: maximum)
000-255
Strobe light. Value: speed (01: slow, 255: very fast)
00-99
Fixed colours Temperature of the light bulb. Value: temperature in ºC
PAR-155CL
COB LED PAR, 1 x 150 W
~100-240 V AC, 50/60 Hz
POWER CONSUMPTION: 150 W
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
MODE
SET
ENTER
4
5 6 7
- 2 -
Publicidad
