EN
generated magnetism may wipe credit card data. It may also cause wristwatches and other
precision instruments to malfunction.
• During and immediately after charging, the Qi charging surface and mobile device will
be warm. This is normal and not a malfunction. If it is unusually hot, check the Qi charging
surface and the mobile device.
• Always place only one mobile device to charge on the Qi charging surface, since only
one device can be charged by Qi at a time. Compatibility with all Qi devices cannot be
guaranteed.
• Do not attach an anti-slip mat or stickers to the Qi charging surface. The presence of such
objects between the mobile device to be charged and the Qi charging surface may prevent
charging.
• If a cover or decorative accessory that does not comply with the Qi wireless power stand-
ard has been attached to the supported device, it may not be possible for the device to be
charged depending on the material, thickness, etc. of the cover or accessory. In such cases,
remove the attached cover or accessory.
User manual
PACKAGE CONTENTS
• 1 x BOLT Qi Wireless Power Bank
• 1 x USB Charging Cable
• 1 × Quick Guide
PRODUCT OVERVIEW (SEE PAGE 2)
1. 4 LED indicator lights 2. Power on/off 3. Wireless output 4. Micro USB input 5. USB output
6. Suction cups 7. USB output 8. Type-C input/output 9. Stand
Maintenance and cleaning
Cleaning:
Switch the product off and remove all plugs before cleaning!
Do not use aggressive or abrasive cleaning agents to clean. They can damage the product!
Protect the device from water drops and water spray. Only use a clean, dry cloth for cleaning
the device and never use any corrosive liquids. Use a slightly damp cloth and a mild cleaning
agent to remove any stubborn dirt.
Make sure moisture does not enter the product while cleaning to prevent damage to the
product and related repairs.
Storage
- When no longer using the device, store it in a dry environment, protected from dust and
direct sunlight.
- If the device is not going to be used for a long period of time, you should recharge it on a
regular basis. This helps maintain battery performance.
- Store your device inside the original case provided.
6
INSTRUCTIONS
How to use
1. Power bank charging (B1):
• Use the micro-USB cable or the Type-C cable to charge the power bank.
• Connect the USB cable to the USB port.
2. Phone charging (B2):
• Dual charging.
• Charge your Qi-compatible phones wirelessly
TROUBLESHOOTING
Some issues that arise may be solved by the user. If the problem persists after having tried
the following solutions, please contact Prozis customer service.
PROBLEM
CAUSE
I cannot charge my Qi-
Make sure its battery is indeed empty.
compatible device.
The power bank is not
The power bank may not be properly
charging.
connected.
A connected device is not
The battery is drained.
charging.
A connected device is not
The device is not connected.
charging
Device to be charged is not placed at the
Wireless charging did not start.
Centre of the Qi-mark.
Warranty statement
All electrical and electronic products commercialized by Prozis via www.prozis.com are cov-
ered by the warranty applicable to the purchase and sale of consumer goods.
GENERAL CONSIDERATIONS
This document contains the terms and conditions of Prozis' warranty for final consumers.
This warranty is valid exclusively for consumers who purchase the product for non-profession-
al purposes.
WARRANTY PERIOD
Prozis guarantees the product is to remain free from material and production defects for a
EN
EN
SOLUTION
If the device is fully charged, wait until its internal
battery is empty again. Then, place the device
back on the Qi-charging surface to charge.
Check that it is connected.
Charge the battery.
Check that it is connected. Short-press the switch
to begin the charging process.
Make sure the device to be charged is in the
correct position, at the center of the Qi charging
surface of the power bank.
Make sure that there are no other objects on the
charging pad.
Remove your device's protective case as it may
be blocking the wireless signal.
7
7