ATH-Heinl 55HAP Manual De Instrucciones página 112

3.2 Basic notes
The machine may only be operated independently by persons who have reached the age of 18, who have
been instructed in the operation of the machine and who have proven their qualification to the employer.
They must be expressly authorized by the employer to operate the machine. The order to operate the
machine must be given in writing.
The machine may only be used for its intended purpose.
Always use specified material for assembly and operation.
Before assembly or disassembly, check all components; they must not show any signs of damage.
If necessary, follow the manufacturer's special instructions for the assembly or disassembly of vehicle-
specific work.
An important part of the guarantee / warranty is the fulfillment of the maintenance schedule. In particular the
cleanliness, corrosion protection, control if necessary immediate repair of damage.
During operation, you should always watch out for hazards. As soon as hazards occur, immediately switch off
the machine, remove the power plug and disconnect the air supply. Then contact your dealer.
All warning signs must always be clearly legible. If they are damaged, they must be replaced immediately.
Danger
Pay attention to possible shearing points of the machine.
Caution
During operation the noise can reach 85dB (A), therefore the operator should take
appropriate protective measures.
Danger
Moving parts of the machine can catch loose clothing, long hair or jewelry.
3.3 Lift
Ensure that there is sufficient clearance upwards in accordance with the vehicle height.
The lifting platform must be fully lowered and no one may be in the service area while the vehicle is being
moved onto the lifting platform.
If the lifting platform is equipped with a wheel-free jack, it must be fully lowered.
Position the wheels in the center of the respective lane.
Stop the vehicle when it touches the front stops or when the desired position is reached.
Apply the parking brake or place the wheel chocks on both sides of the rear wheels.
Make sure that there are no more people in the vehicle before lifting it.
Raise the lift by pressing the Lift button until the desired height is reached.
® Copyright ATH-Heinl GmbH & Co. KG / All rights reserved / Misprints and technical changes reserved
112
Release date: 16.03.2023 / Product manufacturer ATH-Heinl GmbH & Co. KG