Airzone acuazone innobus PRO 32 Manual De Usuario página 49

4.3 ADVANCE FUNCTIONS
4.3.1 Activation / Deactivation time programming.
Icon allows activation of the time time programming. Enter the shortcuts menu (see Fig. 3),
by pressing once on the
To deactivate time time programming of your zone, press once on the
screen (see Fig. 3)
4.3.2 SLEEP FUNCTION
Sleep mode is an Eco-Timer for the zone. By default it is set to Off. Press on the parameter
until desired value is selected
To activate the Sleep Function, enter the shortcuts menu by pressing once on the
icon (see Fig. 3) then, press once on the
How the Sleep Function operates is as follows:
Values available are:
o OFF: Eco-Timer will not work.
o 30: Eco-Timer will be active. 30 minutes after its activation the zone will automatically
switch to off.
o 60: Eco-Timer will be active. 30 minutes after its activation the zone will vary one degree
its set-point temperature and 60 minutes after its activation the zone will automatically
switch to off.
o 90: Eco-Timer will be active. 30 minutes after its activation the zone will vary one degree
its set-point temperature, another degree 60 minutes after the zone will automatically
switch to off 90 minutes after its activation.
When Sleep mode is active, a time line will be displayed on the main screen that informs
of its evolution.
Selection
30
60
90
To deactivate the Sleep function, press once again on the
icon and then on the
30
OFF
+ 1º C / +2ºF - 1º C / - 2º F
+ 1º C / +2ºF - 1º C / - 2º F
icon.
icon. (see Fig. 3).
60
-
OFF
+ 2º C / +4ºF - 2º C / - 4º F
icon
icon, showing main
90
-
-
OFF
49