HUANUO HNCM7 Manual De Instrucciones página 2

IMPORTANT SAFETY INFORMATION
Please carefully read all instructions before attempting installation. If you do not
understand the instructions or have any concerns or questions, please contact
our customer service at support@huanuoav.com.
CAUTION: Avoid potential personal injuries and property damage!
• Do not use this product for any purpose that is not explicitly speci ed in this
manual. Do not exceed weight capacity. We are not liable for damage or injury
caused by incorrect assembly or inappropriate use.
• The desk must be capable of supporting ve times the weight of the monitor
and mount combined.
Check the VESA Pattern of Your Monitor before the Installation
If your monitor VESA is greater than 100x100 mm/4x4 in or less than
VESA 75x75 mm/3x3 in, this mount is NOT compatible.
If this mount is NOT compatible, please contact customer service at
support@huanuoav.com
Tools Needed (Not Included)
Phillips Screwdriver
Supplied Parts and Hardware
WARNING: This product contains small items that could be a choking hazard if swallowed.
Before starting assembly, verify all parts are included and undamaged. Do not use
damaged or defective parts. lf you require replacement parts, please contact our
customer service at support@huanuoav.com.
• PLEASE NOTE: Not all hardware included in this package will be used.
to nd a compatible mount.
Drill(Optional)
01
75 mm 3 in
100 mm 4 in
Minimum VESA pattern:
75mm/3 in(W)x75mm/3 in(H)
7/16 in (11mm) -
7/8 in (22mm)
Drill(Optional)
3/8 in (10mm)
Socket Wrench