HUANUO HNCM7 Manual De Instrucciones página 6

Step 2 Secure the Arm [04] to the Pole [01]
04
UP
WARNING
Solution
If there is no grommet hole on your desk,
position the pole [01] on the mounting
surface and mark the hole. Drill a hole
using the drill bit in a diameter of
a
E2
7/16 in - 7/8 in (11-22mm) at the marked
position through the mounting surface.
03b
c
01
Desk Desk
CASE If the head
is not straight.
Desk Desk
05
F1
Large
Allen Key
Height Adjustment