Aesculap FAV5 CL Instrucciones De Manejo página 10

Battery-powered clipping machine FAV5 CL/FORTIS
Place Li-ion battery 8 in charging bay 6 of the
charger 4 and charge.
- or -
Place battery-powered clipping machine FAV5 CL/
FORTIS 2 in charging bay 10 of the charger 4 and
charge.
Charge state indicator 7 or 9 blinks green.
After charging, the charge state indicator 7/9
shines green and the battery-powered clipping
machine FAV5 CL/FORTIS 2/Li-ion battery 8 is
ready for operation.
4.2 Functional check of the battery-
powered clipping machine FAV5 CL/
FORTIS
Carry out a visual inspection.
Check the switch position.
Install the battery, see Chapter Changing the Li-ion
battery.
Mount the blade correctly and lubricate it if neces-
sary, see Chapter Safe handling blade.
Keep a charged Li-ion battery on hand, as reserve.
Clean battery-powered clipping machine FAV5 CL/
FORTIS prior to use, see Chapter Cleaning/disinfec-
tion.
4.3 Function checks of the charger
Carry out a visual inspection.
Prior to connecting the product to mains power:
– Check mains power cord 5 for possible damage.
– Check the product for any damage (e.g. bent con-
tacts of the charging bays).
Plug in mains power cord 5 at the device socket of
the charging station.
Plug in the mains plug at the mains power socket.
8
Place Li-ion battery 8 in charging bay 6 of the
charger 4 and charge.
- or -
Place battery-powered clipping machine FAV5 CL/
FORTIS 2 in charging bay 10 of the charger 4 and
charge.
Charge state indicator 7 or 9 blinks green.
After charging, the charge state indicator 7/9
shines green and the battery-powered clipping
machine FAV5 CL/FORTIS 2/Li-ion battery 8 is
ready for operation.
The product is ready for operation.
4.4 Safe handling blade
4.4.1 Sharpening the cutting plate
Note
For sharpening the cutting plate, please contact Tech-
nical Service, see Chapter Technical Service.
4.4.2 Changing the blade
Risk of injury caused by sharp cut-
ting plates!
Handle the blade of clipping
machine FAV5 CL/FORTIS with
WARNING
appropriate caution.