Publicidad
Idiomas disponibles
Idiomas disponibles
•
Enter the password for your 2.4g Wifi network and
press confirm.
•
Show the camera the QR code that appears on the
screen, placing the screen a few cm from the lens and
slowly moving it away to a distance of about 15 cm, if
you do not recognize the QR code, continue showing
it by slowly zooming in and out until you hear the
confirmation phrase and press continue.
•
The installation will finish automatically and the camera
will be displayed.
Note: If desired, after installation is complete, you can
reconnect your mobile phone to the 5g network.
Connection failure
If after reading the QR code the installation process fails,
make sure you are connected to a 2.4 GHz Wifi network
and that the provided password is correct. If you do not
have a 2.4 GHz signal in your Wifi network, contact your
internet service provider.
40
Publicidad
