Publicidad
Idiomas disponibles
Idiomas disponibles
Termination connector
4-PIN male connectors
Maximum run length: 16.4ft.
Make sure that the light strip is aligned and fully inserted
into the L shape connector.
Note: Make sure that markings on the strip match
pin-to-pin on both sides of the connection (+ to +, G to G,
R to R, B to B).
Use the optional 3M white cord clips to ensure a better
adhesion.
3. Clean the installation surface. Peel o the adhesive tape
and apply. Make sure the area is dry and smooth for
long-lasting results.
+
12V
G
R
B
Note: For indoor and outdoor use.
Light strip
Connector
+
12V
G
R
B
4. Plug the strip into a standard wall outlet.
5. The LED strip will automatically turn on and enter into
pairing mode (blinking LEDs). Otherwise, press the power
button on the controller to turn on the device. Press it once
more to enable the pairing mode manually.
B. For customized strip lengths
1. First you will need to determine the mounting location of
the strip lights and the total length required.
2. Cut the light strip to the required size using the
designated lines on the strip to preserve functionality.
+
+
12V
12V
G
G
R
R
B
B
+
+
+
+
12V
12V
12V
12V
G
G
G
G
R
R
R
R
B
B
B
B
Publicidad
